Greenlight Electric serves homeowners, renters, landlords, property managers, and commercial clients throughout Shively and the surrounding Jefferson County area. Whether you have a dead outlet, a panel that keeps tripping, or a full rewiring project on an older home, we handle it. Same-day service is often available for urgent calls. Work is performed by licensed electricians who show up ready to diagnose, explain, and get the job done. We test every circuit. We label every breaker. We leave it safe. Call (502) 826-9879 for a quote.
Seeing flickering lights or a warm outlet? Those are the kinds of problems that bring most calls our way, and they are worth taking seriously. A warm switch plate, a breaker that trips under normal load, or a circuit that goes dead without explanation can all point to something that needs attention before it gets worse.
When we arrive, diagnostics come first. We trace the problem to its source, then walk you through what we found and what it takes to fix it before any work begins. You get a clear picture of the job, not a list of parts and a bill you did not expect.
Modern code-compliant repair work often includes GFCI and AFCI protection where older wiring or outlets do not meet current standards. Bathrooms, kitchens, garages, and outdoor circuits are common spots where this comes up in Shively's housing stock. We handle the upgrade as part of the repair, not as an add-on conversation after the fact.
We will find the fault and fix it right.
An aging or undersized panel creates real problems. Breakers that trip under everyday loads, limited capacity for modern appliances, and safety concerns from outdated equipment are all signs that a panel needs attention.
We handle breaker replacement, full panel replacement, fuse box upgrades, and 200-amp service upgrades. Before any panel work begins, we run a load calculation and assess the service entrance to make sure the upgrade matches what the home or building actually needs. No guesswork, no oversized solution that does not fit the situation.
This work is carried out by licensed electricians. Panel upgrades are not a DIY project, and the permit and inspection process exists for good reason. We work through it correctly.
Reach out and we'll start at the panel.
Here's what most people get wrong about their wiring: they assume an outlet problem is just an outlet problem. Often it is a circuit issue, a wiring fault behind the wall, or a load that has outgrown what the original installation was designed to carry.
We install standard outlets, GFCI and AFCI outlets, USB outlets, dimmers, and smart switches. We also add circuits where the panel has capacity and the load calls for it. Dedicated appliance circuits for dryers, refrigerators, and similar high-draw equipment are a common request, and we handle those alongside the outlet work.
For Shively's older housing stock, we also offer whole-home rewiring and remediation of knob-and-tube and aluminum wiring. These are not quick jobs, but they are important ones. Older wiring types carry real risk, and bringing them up to current standards protects the home and the people in it.
Call us and the rest is handled.
Good lighting does more than make a room look better. It affects how safe a space feels, how well a workspace functions, and how much you pay on your electric bill when the fixtures are outdated.
We install light fixtures of all kinds: recessed lighting, LED retrofits, under-cabinet lighting, pendant and flush-mount fixtures, and everything in between. Ceiling fan installation and wiring is a regular call, whether you are replacing an old fan or adding one to a room that has never had one.
Outside, we handle security lights, motion sensors, flood lights, and landscape lighting. A well-lit exterior matters for both safety and property value, and the wiring needs to be done properly to hold up against Kentucky's weather.
Honest recommendations on repairs, never an upsell. We will have your outlets working again in no time.
Jefferson County's four-season climate brings real electrical demands. Hot, humid summers put pressure on panel capacity. Winter ice storms knock out power for hours at a time. Severe thunderstorms and the occasional tornado roll through the Louisville metro with enough force to spike voltage and take out electronics. These are not hypothetical concerns for Shively residents and business owners. They are the reason the following services come up on calls here regularly.
Many homes in Shively were built decades ago, and the panels that came with them were sized for a different era of electrical demand. Central cooling, EV chargers, modern kitchen appliances, and home offices all draw more power than older panels were designed to handle. When summer cooling loads push a panel to its limit, tripped breakers and overheated wiring become a real concern. A panel upgrade gives the home the capacity it actually needs and is often the first step before adding circuits, installing an EV charger, or connecting a standby generator.
Jefferson County's winter ice storms and summer storm season make generator hookups a practical call, not a luxury one. When power goes out for an extended stretch, a properly wired standby generator keeps critical circuits running. We handle transfer switch installation and standby generator wiring, connecting the generator to the home's electrical system so it operates safely and switches over correctly. The focus is on the electrical connection and the transfer equipment, done to code and inspected properly.
Louisville-area storms generate voltage spikes that travel through the utility lines and into the home. A single event can damage appliances, electronics, and anything else plugged in at the time. Panel-level surge protection addresses this at the source, before a spike reaches individual circuits. This is different from a power strip with a surge rating. A whole-house surge protector installed at the panel covers the entire home, not just the devices on one outlet. It is a straightforward installation that pays for itself the first time a storm rolls through.
Getting your electrical problem handled starts with a quick call. EV charger installation is no different. Level 2 home chargers require a dedicated 240-volt circuit, and the panel needs the capacity to support it before anything else happens.
We assess panel capacity first, confirm what the installation involves, and give you the rate and scope on the phone before anything is scheduled. If the panel needs an upgrade to support the charger, we walk you through that as part of the conversation. Ask what the job covers and you get a straight answer.
Home EV charger installation is a clean, well-defined project when the electrical side is handled correctly. We pull the permit, run the circuit, and install the charger outlet where it makes sense for how you park and charge.
Property managers and landlords in the Shively area deal with electrical calls that need to be handled quickly and documented properly. Tenant complaints about dead outlets, tripping breakers, or lighting that does not work are not just inconveniences. They are maintenance obligations, and we treat them that way.
We handle commercial wiring, office and retail electrical work, and electrical work for renovations and additions. Basement and garage wiring, panel upgrades for multi-unit buildings, and electrical safety inspections all fall within what we do regularly. Pre-purchase inspections are available for buyers and investors who want a clear picture of a property's electrical condition before closing.
Smoke detector and carbon monoxide detector installation is part of the service for rental properties that need to meet current safety requirements.
Local accountability means you always know who to call. We are a straightforward choice for homeowners and property managers who need the work done and documented correctly.
We will find the fault and fix it right.
Cost questions are fair questions, and we answer them on the phone. When you call, you get a clear price and a description of what the job covers before anything is scheduled. The scope is confirmed before work begins.
What affects the cost depends on the job. Outlet and switch work is straightforward. Panel replacement involves more labor, materials, and permitting. EV charger installation cost depends on how far the circuit needs to run and whether the panel has available capacity. These are all questions we answer on the call, not after the fact.
Electrical panel upgrade cost and EV charger installation cost are two of the most common pricing questions we get. Both have honest answers that depend on the specific situation. Call and we will walk through yours.
We serve Shively as the primary service area and extend throughout Jefferson County and the Louisville metro. Nearby communities we cover regularly include:
We are open every day from 5:30 AM to 8:30 PM. Call during those hours and you reach someone who can schedule the job and answer your questions.
Most calls fall into one of a few categories: repairs and troubleshooting for dead outlets, flickering lights, or tripping breakers, panel and service upgrades, outlet and switch installation, lighting and ceiling fan work, and dedicated circuit additions. We also handle EV charger installation, whole-home surge protection, and backup generator hookups. If you are not sure whether your situation fits, call and describe what you are seeing and we will tell you what the visit involves.
Call (502) 826-9879 and describe what you are dealing with. We ask a few questions about the job, give you the rate on the phone, and explain what the visit covers before anything is scheduled. You know the price and the scope before we send anyone out.
Stop using the outlet or circuit immediately and do not plug anything else into it. If the panel itself is sparking or producing a burning smell, turn off the main breaker if it is safe to reach and call us at (502) 826-9879. These are safety concerns that need attention the same day, not something to monitor and revisit later.
You get a price and a description of what the visit covers on the call. We confirm the appointment window and let you know what to have ready, typically clear access to the panel and the area where the work is happening. A licensed electrician arrives, diagnoses the problem or scopes the installation, and walks you through the findings before any work begins.
The scope and price are confirmed before we schedule, and any changes to the job are discussed with you before the work proceeds. If a repair uncovers something additional that needs attention, we explain what it is and what it costs before touching it. Nothing is added to the bill without your knowledge.
A repair visit addresses a specific fault: a dead outlet, a bad breaker, a wiring connection that has failed. A panel or service upgrade is a larger project that replaces the distribution equipment itself and often involves a permit and inspection. Both start with the same process: a call, a price, and a clear description of what the visit covers.
The price depends on what the job actually involves, not on square footage as a general rule. A panel upgrade cost is affected by the current service size, the new service size, the condition of the service entrance, and whether a permit and inspection are required. Outlet and switch work is priced by what needs to be installed and how the circuit is currently configured. Call and describe the situation and we will give you an accurate number.
Yes, and it is a significant part of what we do in Shively given the area's housing stock. Older homes may have knob-and-tube wiring, aluminum branch circuit wiring, or panels that were never upgraded from the original installation. We handle aluminum wiring remediation, knob-and-tube replacement, fuse box upgrades, and 200-amp service upgrades. These jobs are scoped on the call so you know what is involved before we start.
Payment is handled at the time of service once the work is complete. The price is confirmed before we schedule, so there is no uncertainty about what you owe when the job is done. If you have questions about payment before the visit, ask when you call and we will walk through it.
Greenlight Electric is ready for your wiring. Call today. Whether it is a repair call, a panel upgrade, a generator hookup, or a full rewiring project, the path forward starts with a phone call. Ready for your wiring. Call today.
Call (502) 826-9879 for a quote. We will have your electrical work scheduled, scoped, and handled correctly.
Below is a plain-language look at the electrical work we handle in Shively and Jefferson County. Each row covers what a service includes, who it fits best, and one practical thing worth knowing before you call. If you have questions about a specific job, the fastest way to get a real answer is to call us directly.
| Service | Scope of Work | Common Situations | Things to Know |
|---|---|---|---|
| Dedicated Appliance Circuits | Electric dryer and range circuitsRefrigerator and washer circuitsWorkshop and garage circuitsCorrect breaker sizing and outlet type | Homeowners adding a major appliance or setting up a garage workshop | Running a large appliance on a shared circuit is a common cause of nuisance tripping and can shorten appliance life. A dedicated circuit is the code-required solution. |
| Electrical Repairs & Troubleshooting | Dead outlets and switchesFlickering or dimming lightsBurning smells near panels or receptaclesCircuit tracing and fault diagnosis | Homeowners and property managers dealing with an active electrical problem | We trace faults to the source rather than resetting breakers and leaving. A repair visit often turns up related issues worth addressing at the same time. |
| Whole-Home Surge Protection | Panel-level surge device installationCorrect bonding and groundingFull-house coverageWorks alongside point-of-use strips | Homeowners with sensitive electronics or frequent storm activity in the area | Jefferson County's summer thunderstorm season and grid-switching events make panel-level surge protection a practical choice. One device covers every circuit in the house, including hardwired appliances. |
| EV Charger Installation | 240-volt dedicated circuitPanel capacity assessmentOutlet or hardwired connectionGarage and parking area runs | EV owners who want faster charging than a standard household outlet provides | If the panel does not have capacity for the new circuit, we handle the panel upgrade as part of the same project so everything is done in one visit. |
| Lighting Installation | Recessed and LED can lightsExterior security and flood lightsVanity and pendant fixturesMotion sensor and driveway lighting | Homeowners updating interior lighting or adding outdoor security fixtures | Outdoor fixtures in Kentucky's climate need weatherproof enclosures and proper grounding. We confirm both before the job is done. |
| Ceiling Fan Installation | Fan-rated box installationNew wiring where none existsReplacement fan hookupRemote and wall-control wiring | Rooms without a ceiling fan or with an existing fixture that needs replacing | Many older Shively homes have ceiling boxes that are not rated for a fan's weight and movement. We replace the box as part of the installation when needed. |
| Basement & Sump-Pump Circuits | Dedicated sump-pump circuitBasement outlet installationGFCI protection in unfinished areasBackup power circuit options | Homeowners finishing a basement or protecting against flooding with a reliable sump circuit | Sump pumps should run on a dedicated circuit with GFCI protection. A shared circuit can trip at the wrong moment. We size and wire the circuit so the pump has reliable power when it needs it. |
| Outlet & Switch Installation | Standard and USB outletsGFCI and AFCI outletsWeatherproof outdoor receptaclesDimmer and switch replacement | Homeowners adding outlets, upgrading receptacles, or replacing worn switches | Tamper-resistant outlets are required in new construction and recommended in any home with children. We install the right outlet type for the location and the code requirement. |
| Wiring & Rewiring | Full home rewiringKnob-and-tube replacementAluminum wiring remediationPartial rewiring for additions | Older homes with outdated wiring systems that affect safety or insurability | Aluminum wiring and knob-and-tube systems are common in Shively's older housing stock. Addressing them improves safety and can resolve issues flagged during a home sale or insurance review. |
| Electrical Panel & Service Upgrades | 100-amp to 200-amp service upgradeFull panel replacementLoad calculation before sizingMeter socket and service entrance work | Homes running central air, electric appliances, and modern loads on an undersized service | A panel upgrade is permitted and inspected work. We handle the permit coordination and confirm the installation meets current code before the job is closed out. |
| Older-Home Rewiring | Full system assessmentKnob-and-tube and aluminum wiring replacementGrounding upgradesCode-violation corrections | Shively homeowners with pre-1970s wiring that has never been updated | Older wiring systems were not designed for the loads a modern home puts on them. Rewiring addresses safety, brings the home up to current code, and can resolve issues flagged by insurers. |
| Backup Generator Installation | Transfer switch installationGenerator hookup and wiringCritical circuit identificationCode-compliant disconnect | Homeowners in Jefferson County who need power during storm outages | A transfer switch is required by code and protects utility workers by isolating your home from the grid before the generator comes on. We handle the electrical side. We do not sell or service the generator unit itself. |
| Electrical Safety Inspections | Panel and wiring condition reviewGrounding and bonding checkGFCI and AFCI protection auditWritten findings and recommendations | Buyers, landlords, and homeowners who have not had the system reviewed in years | An inspection before a property sale or rental can surface issues early, when they are easier and less expensive to address than after a transaction is underway. |
| Wiring for Additions & Remodels | Rough-in wiring for new roomsBathroom and kitchen circuitsBasement and attic wiringFinal connections and cover plates | Homeowners finishing a basement, adding a bathroom, or building out a garage | Addition wiring is permitted work in most jurisdictions. We coordinate the permit and schedule the inspection so the work is documented and code-compliant before the walls close. |
| Breaker & Fuse Repair | Breaker replacementFuse panel assessmentTripping breaker diagnosisPanel interior inspection | Homes where a breaker trips repeatedly or will not hold after being reset | A breaker that trips under normal load, feels hot, or smells like burning plastic is a sign the breaker or the wiring behind it needs attention, not just a reset. |
Call us at (502) 826-9879 to get a price on any of the services above and find out when we can get someone out to your Shively property.
(502) 826-9879