Some electrical problems need attention before the day is out. Others can wait a week for a scheduled appointment. We take both kinds of calls from Shepherdsville and the surrounding Bullitt County area, and the first conversation is about figuring out which one you have. A circuit that is sparking, a panel that smells like heat, or a section of the house that has gone dark without explanation all belong in the first category. A new outlet for the garage, a dimmer swap in the living room, or a ceiling fan installation belongs in the second. Either way, the scope is talked through on the call and the price is settled before anything is booked.
Shepherdsville is a town where a lot of the housing stock carries its age in the wiring. Older homes on original circuits, outbuildings that were wired in stages, additions that were tied into a panel that was already at its limit. That is the kind of work that comes through regularly, and it is the kind we are set up to handle. We cover the full range of residential and commercial electrical repair and installation throughout this area.
Call (502) 826-9879 to get started.
Pricing is settled on the call, not after the visit. What moves a quote is straightforward: the fault itself, what has to be opened up to reach it, and whether the existing panel or circuit can carry the change without additional work. A dead outlet in a finished basement costs more to reach than the same outlet in an unfinished utility room. A panel that needs a new breaker is a different job from a panel that needs to be replaced entirely. A circuit extension that runs through an attic with clear access is priced differently from one that has to be fished through finished walls.
We do not offer a free estimate or a free inspection. What we do is talk through what you are describing, give you a clear rate before anything is scheduled, and explain what the visit covers. If the scope changes once we are on site, that conversation happens before any additional work begins. The price you agree to before the visit is the price the job is built around.
Book the visit. Know the scope. Know the price before it starts.
Rental properties in and around Shepherdsville come with their own set of logistics. The person who calls is often not the person who lives there, and the person who lives there is often not the one who gets the invoice. We work through that on the call. If access needs to be arranged with a tenant, we confirm the timing before the visit is scheduled so nobody is caught off guard.
After the work is done, landlords and property managers often need something on paper. We can walk through what was done and what was found, so you have a clear record of the condition of the electrical system at the time of the visit. That matters before a lease renewal, before a sale, and before a property inspection.
If you are a tenant and your landlord has arranged the visit, you do not need to do anything except be available at the agreed time and point out where the problem is. The scope and the invoice go to whoever booked the job. If the work involves a circuit shutdown, we confirm in advance how long the power will be off and which areas are affected.
A standard switch swap is quick. A smart switch or dimmer installation gets more involved when the existing wiring does not include a neutral conductor, which is common in older Bullitt County homes. We check what is in the box before the parts are ordered, so the installation goes in correctly the first time.
A breaker that trips under normal load, a panel that runs warm, or a fuse box that has not been touched in decades are all situations that call for a closer look. We assess the panel, run a load calculation, and size the replacement to what the property actually needs now, including any circuits that are planned for the near future. Panel upgraded. Circuits balanced. Home powered safely.
A full rewire replaces the branch circuit wiring from the panel outward. A partial rewire addresses a specific section, a single room, or a problem area. The decision depends on the age and condition of the existing wiring, whether the home has knob-and-tube or aluminum branch conductors, and how much of the structure is accessible without opening finished surfaces. We assess what is there and explain the options before any work is scoped.
A safety inspection covers the panel, the wiring, the outlets, and the grounding throughout the home. Pre-purchase inspections are a common request in a town where older homes change hands regularly. An inspection tells you what is there, what is working correctly, and what needs attention before it becomes a larger problem. Work in this area gets done to the code inspectors here actually enforce.
A panel-mounted surge protector intercepts voltage spikes before they reach the wiring and devices throughout the house. A power strip handles small surges at one outlet. A whole-home device handles what comes in through the service entrance, including the kind of spike that follows a nearby lightning strike. In a region where severe storms are a regular part of the calendar, that layer of protection is worth having in place.
A home running on 60-amp or 100-amp service often cannot support a modern appliance load alongside an EV charger or a standby generator connection. A service upgrade replaces the existing entrance equipment and installs a panel sized for what the property actually draws. The upgrade also creates room for dedicated circuits and subpanel installation if the layout of the home calls for it. We handle the load calculation, the panel replacement, and the grounding and bonding as a single job. If you would rather read than call, our full list of electrical services has the detail.
Most outlet, switch, and fixture work only requires isolating the circuit involved. The rest of the house stays live. If you are working from home, we confirm which circuits will be off and for how long before the visit starts, so you can plan around it.
Panel replacements and service upgrades require a full shutdown for part of the visit. The meter is pulled, the old equipment comes out, the new panel goes in, and the power comes back on before we leave. For a home where someone is working remotely or a business that needs to stay open, we schedule the shutdown for the window that causes the least disruption. We do not leave a property without power at the end of a visit.
We'll trace it, fix it, and test it before we leave.
We are available every day from 5:30 AM to 8:00 PM, and we take short-notice calls when the schedule allows. Active electrical faults are handled within those hours. When you call, we go through what you are dealing with, confirm what the visit covers, and settle the price before anything is put on the calendar.
For rental properties and businesses that need to stay open, we work out the access and timing on the call. If a tenant needs advance notice, that is built into the scheduling. If a retail space or office needs the work done before opening or after closing, we talk through what the schedule can accommodate. Electrical service scheduled without the runaround is what we aim for on every booking. One call is enough to get the visit booked.
For exterior lighting, circuit installation, backup generator hookups, and other jobs where the scope depends on the layout of the property, we go over the specifics on the call so the visit is planned around what is actually there.
We provide electrical service throughout Shepherdsville and the broader Bullitt County area. The communities nearby are covered as well, including Fox Chase, Hebron Estates, Pioneer Village, Hillview, and Brooks. Whether the property is inside the town or farther out in the county, the process is the same: the scope is confirmed on the call, the price is agreed before the visit, and the work is done to code.
Call (502) 826-9879 to reach us.
We cover Shepherdsville and the surrounding area every day from 5:30 AM to 8:00 PM.
The inspection covers the panel, the service entrance, the visible wiring, the outlets, the grounding and bonding, and any areas of the property where electrical concerns are present. We look for code violations, signs of overloading, improper connections, and equipment that needs attention. A written summary of findings follows the inspection.
Not necessarily. We assess what was done and whether it can be corrected to code or needs to be redone. The answer depends on the materials used, the connections made, and whether the installation is safe to build on. We explain the options before touching anything.
Older properties often have wiring from multiple eras, each with different materials and standards. We assess what is there, identify what is safe to leave in place, and explain what needs to be updated. The approach is based on the actual condition of the wiring, not its age alone.
Outdoor outlets require weatherproof covers, ground-fault protection, and wiring rated for exterior use. The box and cover must be rated for the exposure level at that location. We install outdoor outlets to those requirements as a standard part of the job.
In many cases, yes. If the work does not require shutting off the circuit that feeds the refrigerator, it stays on. For panel work that requires a full shutdown, we discuss in advance which appliances need to be protected and for how long the power will be off.
Whether you have an electrical problem in Shepherdsville that needs attention right away or a project you want to plan for next week, the first step is the same.
Call (502) 826-9879 and describe what you are dealing with.
We cover residential and commercial electrical work throughout this area, and the rate is settled on the call before the visit is scheduled. Reach out and we'll start at the panel.
Electrical work also reaches these towns: Hillview, Mount Washington, Radcliff, Jeffersontown, Elizabethtown.
See our area list.
Below is a plain-language look at the electrical work we handle for homes and businesses in Shepherdsville and across Bullitt County. Each row covers what the service involves, who it fits best, and a practical note worth knowing before you call. If a job spans more than one category, we scope it as a single visit and confirm the price before anything starts.
| Electrical Service | What It Covers | Ideal For | Things to Know |
|---|---|---|---|
| Electrical Panel & Service UpgradesMost Popular | 100-amp to 200-amp service upgrades, Fuse box replacement, Subpanel installation, Load calculation and grounding | Homes adding major appliances, EV chargers, or running on outdated service | Panel upgrades are permit-required work. We handle the permit process as part of the job so the installation is inspected to current code. |
| Ceiling Fan Installation | Fan and light kit installation, Box reinforcement for fan weight, Separate switch wiring for fan and light, Fan replacement on existing circuits | Any room where the existing box was not built to support a fan | A standard ceiling box is not rated to hold a ceiling fan. If the box needs to be replaced or reinforced, we handle that as part of the same visit. |
| Backup Generator Installation | Transfer switch installation, Panel tie-in for generator feed, Portable and standby generator hookup, Utility isolation and safety wiring | Homes and businesses in Bullitt County that lose power during ice storms or severe weather | A transfer switch keeps the generator isolated from the utility line. That isolation is required for safety and for compliance with utility rules. |
Call us at (502) 826-9879 and we will go over what the job involves, what it costs, and when we can get it scheduled.
(502) 826-9879