Shively Electrical Company serves homeowners, property managers, and business owners across Shively and Jefferson County. Whether the job is a tripped breaker at a single-family home or a full panel upgrade at a commercial property, we handle it the same way: a clear scope on the call, a price before anything is booked, and work that holds up. We are available every day from 5:30 AM to 8:00 PM.
Call (502) 826-9879 to get a quote. Residential wiring. Commercial wiring. One number for both.
Dealing with a tripping breaker or a dead outlet? Those symptoms are easy to dismiss as minor until the problem spreads. A breaker that trips repeatedly under normal load, outlets that stop working in one room, flickering lights that come and go, or a partial power loss that leaves half the house dark are all signs that something in the wiring or panel needs attention.
A diagnostic visit covers the full circuit path from the panel to the affected outlet or fixture. We test for loose connections, overloaded circuits, and faults at the device level. Where the home has GFCI or AFCI protection, we check that the devices are functioning correctly and placed where the circuit requires them. An electrical safety inspection can be added to the visit if you want a broader look at the panel and wiring while we are already on site.
We take pride in the electrical work we leave behind, which means we do not close up a wall or pack up until the fix is confirmed. We'll trace it, fix it, and test it before we leave.
A panel that was sized for a smaller load will struggle to keep up as a home or building adds circuits. If breakers trip under loads that should be routine, if there is no room to add a circuit, or if the building still runs on a fuse box, a panel upgrade is usually the right call.
We carry out the full scope: replacing the main panel, calculating the service-entrance capacity needed for the existing and planned load, and installing a subpanel where a detached garage, workshop, or finished basement needs its own feed. For commercial properties, the same logic applies. A retail space adding refrigeration equipment, an office adding server load, or a multi-unit building adding tenant circuits all need a panel sized to match.
Electrical service scheduled without the runaround means the scope is settled on the call before the visit is booked. Reach out and we'll start at the panel.
Here's what most people get wrong about their wiring: age alone does not make it dangerous, but age combined with the wrong material or the wrong installation does. Knob-and-tube wiring, which was standard in homes built before the mid-twentieth century, was not designed for the loads a modern household puts on it. Aluminum branch-circuit wiring, which was used in a wide range of homes built during the 1960s and 1970s, requires specific devices and connection methods to stay safe. Both show up regularly in Jefferson County's older housing stock, and both call for a careful assessment before any new load is added.
Whole-home rewiring replaces the branch circuits from the panel outward. It is commonly triggered by an insurance requirement, a home sale inspection, or a remodel that opens enough of the walls to make the work practical. Partial rewiring is also an option where only certain circuits need replacement.
For additions and remodels, we run new circuits to kitchens, bathrooms, basements, and garages. That work includes grounding and bonding to bring the new circuits into compliance with current code. Code-compliant wiring on every job is not a tagline. It is what the inspection requires and what the next homeowner or tenant will expect.
Outlet and switch work covers a wider range than most people expect. A standard outlet swap takes an hour. A GFCI outlet in a bathroom or kitchen, an AFCI outlet on a bedroom circuit, or a USB outlet at a desk or nightstand each involves confirming the circuit is appropriate for the device before the work starts. Dimmer switches require a compatible fixture and a load check. None of it is complicated, but doing it right means checking the circuit, not just swapping the device.
Lighting work follows the same principle. Recessed lighting in a finished ceiling, under-cabinet lighting in a kitchen, a ceiling fan where there was no existing box, or exterior fixtures for a driveway or back porch all require a circuit that can carry the load and a box that is rated for the fixture. We handle the wiring and the installation together so the fixture is placed correctly and the circuit is confirmed before we leave.
Outdoor and landscape lighting, security lighting, and motion-sensor fixtures are all part of the scope. One call is enough to get the visit booked.
Jefferson County runs through four full seasons. Summers push cooling loads hard, winters bring ice storms and the occasional extended outage, and the pace of EV adoption in the Louisville metro has been steady. That combination puts generator hookups, surge protection, and EV charger circuits in regular demand. An EV charger or a hot tub often means checking the panel first, and that check is where we start on every one of these jobs.
A Level 2 home charger needs a dedicated 240-volt circuit run from the panel to the garage or driveway. The work involves a load calculation to confirm the panel has capacity, a dedicated breaker, and a wiring run sized for the charger's amperage. We confirm the panel can carry the added load before anything is scheduled, and the circuit is installed to match the charger's specifications.
A portable or standby generator is only as useful as the transfer switch that connects it to the house. We install manual and automatic transfer switches, run the wiring from the switch to the panel, and confirm the interlock or switch prevents the generator from back-feeding the grid. The work is scoped on the call so you know what the installation involves before the visit is booked.
Point-of-use surge strips protect individual devices. A panel-level surge protector covers every circuit in the building from a single installation point. It absorbs voltage spikes before they reach appliances, electronics, and HVAC equipment. The device mounts at the main panel, and the installation is straightforward once the panel has been assessed for available space.
Wiring is easier to deal with when somebody explains it plainly, and that applies as much to a property manager fielding a tenant complaint as it does to a homeowner with a dead outlet. We work with small business owners, retail tenants, office occupants, and building managers across Shively and the surrounding Jefferson County communities.
Commercial scope includes panel upgrades and subpanel installations, dedicated circuits for kitchen equipment, server loads, and point-of-sale systems, outlet and lighting work throughout a space, and wiring for tenant improvements and build-outs. The process is the same as on the residential side: the scope and the price are confirmed before the visit is scheduled, and the work meets the code the local inspectors enforce.
We show up ready to wire, which means the visit does not start with an hour of back-and-forth about what the job covers.
We are available every day from 5:30 AM to 8:00 PM. That window covers early-morning calls before a workday starts and evening calls after a tenant or homeowner gets home. Urgent faults, partial power loss, and panel trips that need prompt attention can be scheduled within those hours. Ask what the schedule allows when you call and we will tell you what is open.
Pricing works like this: the rate is given on the call, before anything is booked. You are told what the visit covers and what the work involves. If the scope changes once we are on site, the price is confirmed again before the additional work starts. There is no invoice waiting at the end of a job that was not discussed at the beginning.
Book the visit. Know the scope. Know the price before it starts. Call now and we'll get the power back where it belongs.
If you've never hired an electrician before, the first question is usually whether someone will actually show up and whether they will be straight about what the job costs. We cover Shively as our primary service area and take calls from across Jefferson County, including Louisville, St. Matthews, Pleasure Ridge Park, Valley Station, Fairdale, and Jeffersontown. If you are in the county and are not sure whether we reach your address, call and ask.
The work is carried out locally, and the people answering the phone know the area and can scope a job before the visit is booked. That means the visit starts with a clear picture of what needs to happen, not a first look at a job that was never described.
The work is carried out locally by someone who knows the trade and can handle the job from the first look at the panel to the final test of the circuit. The person answering the phone when you call can scope the job and confirm what the visit covers before anyone is sent out.
Older homes in Shively and across Jefferson County carry a range of wiring types, including knob-and-tube, aluminum branch circuit wiring, and cloth-wrapped conductors. We assess what is there before recommending any work, and we explain what the wiring involves and what the options are before anything is started.
Every job ends with a test of the affected circuit, device, or fixture. For outlet and switch work, that means confirming the device is live, protected correctly, and holding under load. For panel work, it means verifying breaker function, grounding, and bonding before the panel cover goes back on. We do not close up until the fix is confirmed.
Note where the problem is happening, what symptoms you are seeing, and when it started. A breaker that trips at a specific time of day, an outlet that stopped working after a storm, or a light that flickers only on one circuit are all details that help scope the job on the call. The more specific you can be, the more accurate the estimate will be.
Ask what the visit covers, what the price includes, and whether the scope can change once the work starts. We answer all of those on the call: the scope is confirmed before the visit is booked, the price is given before anything is scheduled, and any change in scope is discussed before additional work begins.
If something related to the work we did needs a follow-up, call (502) 826-9879 and describe what you are seeing.
We will assess whether it is connected to the original job and schedule a return visit to address it. We take pride in the electrical work we leave behind, and that means standing behind what was done.
If a specific breaker, device, or component is not available on the initial visit, we let you know what is needed and what the timeline looks like before we leave. The work that can be completed is done. The part requiring the return visit is confirmed before we go, so you know exactly what is still outstanding.
Shively Electrical Company is available every day from 5:30 AM to 8:00 PM.
Call (502) 826-9879 to get a quote, describe what you are seeing, and find out what the visit covers. Panel upgraded. Circuits balanced. Home powered safely.
(502) 826-9879